- Printing
- Labs · Ditsy
- Design
- ML-01·0007
- Next
- Line
- 1.00×
- Base
- Maharashtra, IN
- Status
- Running
- Feed
- @majeka.labs ↗
Synchronised for certainty.
Industrial digital textile printing in Maharashtra, India. Pigment and reactive print, washing and an in-house design lab, run as one line.
- Pigment · Reactive
- Finish
- Washing range
- Studio
- In-house design lab
- Setup
- Chinese & European standard
Every doubt a buyer has, answered before the first metre.
-
Approved before it is printed.
Every order starts with a strike-off: a printed sample of your design on your fabric. Production only begins once you sign it off, and the run is checked against that sample.
-
A dispatch date, agreed in writing.
Print, fixing, washing and finishing happen in one unit, so the date doesn't depend on outside job-workers. You get the date with the order confirmation.
-
Inspected in motion.
Cloth is checked metre by metre against the approved strike-off before it is rolled. Digital print keeps the same file and the same colour profile from the first metre to the last.
-
One thread, enquiry to dispatch.
Write to email. The same thread carries your artwork, strike-off approval, production updates and dispatch details.
From greige to roll, on one line.
Two print routes share the same floor. Switch between them to see what changes.
Artwork
The design lab prepares repeats, colourways and print files.
Strike-off
A sample is printed and sent for your approval.
Reactive dye inks printed onto prepared fabric.
Steam
Steaming bonds the dye into the fibre.
Wash
Connected tanks wash out unfixed dye.
Inspect
Checked metre by metre against the strike-off.
Dispatch
Rolled, labelled and sent on the agreed date.
Reactive dye becomes part of the fibre, so loose dye is washed out before finishing.
Reactive
The dye bonds chemically with the fibre, then is steamed and washed. Deeper colour and a soft hand on natural fabrics.
- Fibres
- Cotton, viscose, linen
- Fixation
- Steam
- Washing
- In-house wash range
- Hand
- Soft, as the base fabric
Pigment
Colour sits on the surface and is heat-cured. Works across cotton, blends and synthetics, with fewer steps for sampling and volume.
- Fibres
- Cotton, blends, polyester
- Fixation
- Dry heat cure
- Washing
- Not required
- Hand
- Slightly crisper
Printed on our floor.
Photographs of real lengths from production. Open one to inspect it up close, or send it to the line above.
Hit the strike-off.
Each target is a colour sampled from one of our prints. Mix the four inks until your patch matches. Under ΔE 2.0 the difference is hard for the eye to see, and the strike-off is approved.
Off
On the real line the design lab matches your reference with calibrated colour profiles, and the strike-off is what you approve.
Under one roof.
A Chinese- and European-standard setup, from file to finished roll.
Design lab
Repeats, colour separation, colourways and strike-off files, prepared in-house.
- Input
- Your artwork or brief
Digital printing
Industrial-width digital printing for pigment and reactive inks.
- Width
- On request
- Output
- On request
Curing & steaming
Dry heat cures pigment. Steam fixes reactive dye into the fibre.
- Routes
- Pigment · Reactive
Washing range
Connected tanks wash out unfixed reactive dye before finishing.
- Used for
- Reactive route
Inspection
Metre-by-metre checks against the approved strike-off.
- Against
- Your approved sample
Roll & dispatch
Rolled, labelled and packed for dispatch on the agreed date.
- Lead time
- Confirmed per order
Who we print for.
Extra capacity for running orders.
Send the file and the fabric. We print, fix, wash and return it on schedule.
A design lab on your side.
Repeats, colourways and strike-offs before you commit to a run.
One unit, one point of contact.
Approved strike-offs, consistent runs and clear communication by email, in English.
How an order runs.
Send your file
Artwork, fabric, quantity and the date you need it.
You get: a reply with optionsStrike-off
The design lab prepares the file and prints a sample on your fabric.
You get: a printed sampleApprove
You sign off colour and scale. That sample becomes the standard for the run.
You get: a dispatch datePrint & dispatch
Printed, fixed, washed where needed, inspected and rolled.
You get: your fabric, on timeWhat should I send with my enquiry?
Your artwork in any high-resolution format, the fabric you want, approximate metres and your deadline. If the artwork isn't print-ready, the design lab can prepare the repeat and colourways.
Pigment or reactive: which do I need?
Reactive suits natural fibres like cotton, viscose and linen when you want deep colour and a soft hand. Pigment works across cotton, blends and polyester with fewer steps. If you're not sure, tell us the fabric and end use and we'll recommend one.
Is there a minimum order?
It depends on the fabric and the process. Send your approximate metres and we'll confirm what's possible.
Do you work with buyers outside India?
Yes. Enquiries are handled by email in English, and every order is approved on a strike-off before production.
Start an enquiry.
Tell us what you're printing. We reply by email with options, timelines and a strike-off plan.
The line keeps running on Instagram.
New prints, new designs from the lab and the line in motion, posted as a running series. Follow to see what comes off the line next.
